New Circuit Happy Eurorack Clock Generator

Circuit Happy says that they are back with an updated version of their popular and powerful 2HP ML:2 eurorack module, with the ML:2m.

A spokesperson told us, "The ML:2m adds MIDI Clock Output ability to the already existing wealth of synchronisation abilities, making this a true synchronisation solution for all of your needs."

Here's the full details direct from the company...

Available to pre-order now, the ML:2m is a 2HP Eurorack Clock Generator at its heart providing synchronisation outputs through the use of wireless Ableton Link connectivity as well as two simultaneous 5V physical Clock outputs capable of generating Clocks at various PPQN settings, Trigger Reset and/or Run/Stop Gate for DIN-Sync style clock. With this new updated version, the ML:2m offers the ability to generate both CV Clock and Trigger Reset from the same physical output (A) through the use of a dual mono TRS adapter jack. MIDI Clock can then be accessed from the physical output (B) through the use of a TRS A MIDI adapter (included in the box)!

Connect The ML:2m's analog clock outputs to your eurorack modular synth, connect the TRS MIDI Out port to your favourite drum machine and even synchronise wirelessly to your Ableton Link enabled DAW or iOS device for a hassle free yet extremely tight synchronisation solution. All of the configuration is taken care of with a simple, yet powerful online configurator and once it's setup just how you like, can be left alone forever!

Company Director, Ed Guild says "We had such an amazing response to the ML:2 in terms of how easy the device is to use and just how tight it is across the various synchronisation abilities that we knew we wanted to offer more synchronisation ability if we could. So, I went back to the drawing board and after some tinkering, I discovered that I could add MIDI Clock Output without changing the already small form factor and overall design. So here it is - the ML:2m!"

Earlier this year, Circuit Happy took over Schneidersladen with a truly one of a kind special event, whereby they setup several Missing Link modules around the store, synchronised them all together and enabled everyone who attended with the ability to participate in a store-wide jam! Schneidersladen was completely synchronised using the Missing Link and ML:2m, showing everyone just how powerful and easy it is to use these devices.

The ML:2m is now available to pre-order, requiring nothing but your email [no money down payment required] in order to be placed onto the list should you wish to be notified of when the first batch go on sale first! Simply head over to https://www.circuithappy.com/products/ml2m/, pop your email address in and you are on the list! You will also be entered into a free prize draw for some sweet Circuit Happy swag! Keep an eye also on their Instagram page for updates as we head closer to the release date.

ML:2m Features:

• Two Configurable 5V Clock Outputs
• Outputs A & B can be configured in several ways:
• Output A can be configured to send both CV Clock and Reset using a stereo to dual mono adapter - thats CV Clock and Reset from the same port!
• Output B can be configured to send either CV clock or MIDI clock out. TRS to DIN adapter included in the box!
• Clocks at various PPQN settings
• Trigger Reset each loop or at Loop Start or Stop
• Run/Stop Gate for DIN-Sync style clock

 

2.4 GHz WiFi Connectivity

• The Missing Link can join your home or studio WiFi network to jam with your other Link devices. No reliable WiFi nearby? The Missing Link is happy to be the WiFi Access Point all the Link devices connect to.

 

Delay Compensation

• Sometimes The Missing Link is a little ahead or behind in time with respect to your other Link devices. Adjust the delay compensation to nudge forward or backward in relation to your other Link devices.

 

Technical Specifications

• Power Requirements: 5V 500 mA eurorack power supply
• WiFi Antenna: 2.4 GHz (does not support 5 GHz networks)
• Dimensions: 83 mm x 83 mm x 21 mm

 

What's included in the box?

• Two patch cables
• 3.5 mm TRS A to 5-pin DIN MIDI cable adapter
• 2.4 GHz WiFi antenna (not compatible with 5G networks)

 

Circuit Happy also provide a powerful yet compact desktop box version - The Missing Link Junior  that provides the same effortless solution to synchronisation across your entire studio. Just like the ML:2m, the Missing Link, uses the Ableton Link protocol and can connect to any Ableton Link enabled software or hardware wirelessly - either through your local network or by generating its own wireless network. No long MIDI cables, no installation, just free-flowing sync that works.

The Missing Link features flashing LEDs to indicate tempo and network status and has the ability to adjust for delay compensation to align all devices to the beat grid. The included 5V 500mA USB-C power adapter (including USB-A to USB-C cable) provides the necessary power, while a simple web-based interface allows you to configure the sync outputs to your studio needs.

Pricing and Availability:

See website.

More information:

• ML:2m

• Knobcon 2026: Circuit Happy Missing Link Uno 16-Sep-26
• Bristronica 24: Circuit Happy ML2M Eurorack Module Ships 13-Oct-24
• New Eurorack Clock Generator Ships 09-Oct-24
• Knobcon 24: Circuit Happy's Latest Clock Generators 13-Sep-24
• Circuit Happy Hosts a Free Event at SchneidersLaden Berlin 11-Jul-24